Lab Complete!

You found the flag hiding in cleartext traffic.

LABS / packet analysis
BEGINNER+
Tasks
What is a packet?

Every message on a network is chopped into small chunks called packets. Each one carries a header (who it's from, who it's for, what protocol) and a chunk of data. Packet analysis means reading these to understand what really happened on the wire.

Think of mail: Each packet is an envelope. The header is the address on the front. The payload is the letter inside. Sniffing traffic is like reading every envelope passing through a mailroom.
Reading the packet list
ColumnMeaning
Source / DestinationSending and receiving IP addresses
ProtocolThe language used: TCP, HTTP, DNS, FTP...
InfoA short summary of what the packet does
Plaintext vs encrypted

FTP, HTTP, Telnet and DNS send data in readable text — anyone capturing the traffic can see it, including passwords. HTTPS/TLS encrypts the content, so a capture shows only that a connection happened, not what was said.

This is why plaintext protocols are risky: if an attacker sits on the same network, they can read logins sent over FTP or HTTP in plain sight.
Filtering traffic

Capturing everything creates noise. Display filters narrow the view. The filter box above the packet list on the right understands simple ones:

ftp # only FTP packets http # only HTTP packets dns # only DNS packets ip.addr==10.0.0.5 # either side matches tcp.port==21 # either side on this port
Permission first: Capturing traffic that is not yours or that you are not authorized to monitor can be illegal. This lab uses a pre-made, simulated capture.
Mission: A capture from a small office network is loaded on the right. Somewhere in it, a login was sent in plaintext. Find it.
1
Narrow to one protocol
Type ftp into the filter box and apply it. How many packets remain?
2
Read the login
Click through the FTP packets in order and read the Info column — a username and password are sent as separate commands.
3
Check a specific host
Filter by ip.addr==10.0.0.9 to see everything to or from that one machine.
4
Open the flag packet
One packet's details panel contains a flag. Click it to reveal the full payload, then submit the flag below.
Try first, then peek. Hints nudge you without the exact answer.
Lowercase protocol names work as filters by themselves: just type ftp and hit Apply.
Logins over FTP usually appear as two lines: one starting USER and one starting PASS.
Click directly on a packet row — not just filter — to open its detail panel below the list. Look at packets right after the login succeeds.
Stuck after trying? Reveal the walkthrough.
No.TimeSourceDestinationProtoInfo
Click a packet row to see its details here.
Filters supported in this simulator
ftp / http / dns / tcp / tls ip.addr==X.X.X.X ip.src==X.X.X.X ip.dst==X.X.X.X tcp.port==N tcp.srcport==N tcp.dstport==N contains "text"